Maker Pro
Maker Pro

On off switch using a DC to DC converter

overture3d

Sep 28, 2012
22
Joined
Sep 28, 2012
Messages
22
I am trying to redesign a circuit. The circuit basically switched an output to on when a button was pressed and stayed on until the button was pressed again. The original circuit was damaged and taken apart, so I don't really know how it was put together, but the only component, other than some resistors and capacitors, was a DC to DC converter ic.

Has anyone ever seen this ic used in this way?
 

BobK

Jan 5, 2010
7,682
Joined
Jan 5, 2010
Messages
7,682
That would be an odd chip to use for that purpose. I haven't a clue how one would do so.

Bob
 
Top