O
Octavio
- Jan 1, 1970
- 0
I'm using a 74HC4060(A) oscillator/divider with a 15MHz crystal in the
oscillator section. That oscillator must be able to turn on/off (using the
reset pin) with a 43uS ON / 8uS OFF duty cycle.
I'm not familiar with oscillator startup time stuff so I ask:
The oscillator must start oscillating within 1uS to give a reasonable number
of counts, say about 7 million cycles at the end of that microsecond.
Is this possible?
Thanks for any input!
Octavio
oscillator section. That oscillator must be able to turn on/off (using the
reset pin) with a 43uS ON / 8uS OFF duty cycle.
I'm not familiar with oscillator startup time stuff so I ask:
The oscillator must start oscillating within 1uS to give a reasonable number
of counts, say about 7 million cycles at the end of that microsecond.
Is this possible?
Thanks for any input!
Octavio