Maker Pro
Maker Pro

oscillator working in falstad for real this time

dragon

Oct 31, 2022
248
Joined
Oct 31, 2022
Messages
248
youtube.com/watch?v=hf5C8pn6rME

Its two inverters inverting each other through coupling capacitors.
Its the design I was always trying to get to work.

So with the help of this new style of inverter which I call a "battery toggler" I can now employ transistors with it. (So its compatable with them.) The transistors helped it work, it can run without the transistors but it doesnt have enough umph to recharge back the capacitor from the other capacitor.

I was always trying to do it without transistors, and I still want to do it, theres some way to get it to work, but this proves the idea is good, its pretty similar to the astable multivibrator, just my own concoction.

Its taken me an embarressing amount of time to get this to work, its been 10 years, I just got sick in the head from smoking then I couldn't think straight for a long time, but I kept at it, and getting on falstad helped me alot, I came up with the "battery toggler" and then I finally was able to employ the transistor to get the amp it needed.

There may be a way to do it without the transistors, and now I'm going to look in this direction.
But i'm probably going to wiire this one up in real life soon, cause its going to be handy having my own reconfigurable oscillator without having to buy a 555, just a couple of npn transistors will do!!!
 
Last edited:

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,758
Joined
Nov 17, 2011
Messages
13,758
oscillator working in falstad for real this time
No, it's not real, it is still a simulation with alle the possible pitfalls.
You haven't shown us a single real working circuit.
youtube.com/watch?v=hf5C8pn6rME
Are you deliberately trying to confuse us by your style of "schematic drawings"?
then I couldn't think straight for a long time
Looks like that time is not yet over.
There may be a way to do it without the transistors
No way. Oh. wait, yes there are ways: use vacuum tubes. Or pin diodes.
No transistors: yes.
No active elements: no
 

dragon

Oct 31, 2022
248
Joined
Oct 31, 2022
Messages
248
I have no idea, again!!

Martin
You can see it working on the youtube video.
Its very similar to an astable multivibrator.

Harold, why say something is impossible when you havent even tried it yet???
 

dragon

Oct 31, 2022
248
Joined
Oct 31, 2022
Messages
248
Ok. Ive just got the solution. Im starting another thread for it!
 
Top