Maker Pro
Maker Pro

Output From Differential Phase Shifter

Mira

Aug 18, 2012
2
Joined
Aug 18, 2012
Messages
2
Using Multisim, I try to simulate the Differential Audio Phase Shifter circuit from:

http://electropub.files.wordpress.c...-4-coils-wrapped-around-a-ferrite-toroid1.pdf

I simulate just a single channel with 10k resistors.

When running the simulation, Multisim complains about a convergence issue, and wants to automatically solve it. It is able to solve that issue. I have no idea what this convergence issue is about.

The problem is that the output sine waveform is distorted as shown on one of the attached screenshots.

If I change all resistors to 1uohm, I get a nice sine waveform at the output (unshifted).

How can I change this circuit to get a 90 degree phase shift, and proper sine waveforms (with two channels)?
 

Attachments

  • dfs-ch1.png
    dfs-ch1.png
    47 KB · Views: 191
  • scope.png
    scope.png
    46.6 KB · Views: 268
  • setup.png
    setup.png
    25.3 KB · Views: 247

Mira

Aug 18, 2012
2
Joined
Aug 18, 2012
Messages
2
Changing the signal source from AC_POWER to a function generator, and replacing the operational amplifiers from 741 to LM324N fixed both issues.
 
Top