Maker Pro
Maker Pro

P I metal detector coils

hargrovebrian

Feb 25, 2010
1
Joined
Feb 25, 2010
Messages
1
Hi

I am trying to build a 16 ft coax cable coil for a F1A4 metal/mine pulse induction detector.

I was told by the company that this is simular to a commersal sd2100 by minelab.
but that is as far as they will go on information about coil design.

I have seen detector coils that are towed behind cars or orv's.

Thier are company's that sell Pulse Induction detectors that use large coils (26 ft)(4 ft square).

Is it possable to build a large coil for the pulse induction detector?

How large?

Thank You Brian
 
Top