Maker Pro
Maker Pro

P18 programmer

M

Marra

Jan 1, 1970
0
Hi,
I'm currently using DIY JDM programmer (with IcProg) to program
16fxxx.

Now i'd like to play with 18F4620, but it's not supported by IcProg.

I know that both WinPic800 (http://www.winpic800.com/index.php?
lang=en) and picpgm (http://www.members.aon.at/electronics/pic/picpgm)
supports 18F4620.

But now i want to use ICSP : how can i configure SW and where can i
see a schematic to do this ?

Thanks

As a PIC engineer for 25 years I would seriously suggest Microchip
programmers and dev kit.
I have seen so many people have problems with other peoples kit !
 
D

D from BC

Jan 1, 1970
0
As a PIC engineer for 25 years I would seriously suggest Microchip
programmers and dev kit.
I have seen so many people have problems with other peoples kit !

Or you could do what I did.. I designed my own universal programmer.
Used Delphi and the parallel port.
Any IC changes...I just change the PC software.
D from BC
 
M

merco

Jan 1, 1970
0
Or you could do what I did.. I designed my own universal programmer.
Used Delphi and the parallel port.
Any IC changes...I just change the PC software.
D from BC- Nascondi testo tra virgolette -

- Mostra testo tra virgolette -

good...
I use VB but i know also delphi...
and now i'm going to build this...
http://www.ucapps.de/mbhp/mbhp_burner.pdf

Can I use your software with that programmer ?
 
Top