Maker Pro
Maker Pro

Paig Gid - make me a plan for a small Electric Field Generator

Status
Not open for further replies.

David07

Feb 12, 2024
1
Joined
Feb 12, 2024
Messages
1
Dear Engineer,

I want to build an Electric Field Generator, from 0,5 to 1.6mhz 600V/cm.
I make my own liquids for E-cigarettes, naturally extracted tobacco. Just like wine, they need to age for a long time. 2x 8 weeks. Every additional change to recipe takes another 4 weeks. This can be avoided with electrical fields. I need to treat 200ml glass bottles.

Experiments have been done and have brought amazing results. A lot of companies are already doing it for the food and wine industry.

So, is someone willing to make a plan of everything I need and how to assemble it. It´s a bit tricky because I don´t have experience with this area. I am a graphic designer, so this plan needs to be a no brainer plan. I can solder.
And how much would it cost for you to design it?

Thank you.
Wishing you a great day.
David
 

Attachments

  • PEF-System-a-high-voltage-power-generator-b-function-arbitrary-waveform-generator.png
    PEF-System-a-high-voltage-power-generator-b-function-arbitrary-waveform-generator.png
    228.1 KB · Views: 4

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,651
Joined
Nov 17, 2011
Messages
13,651

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,651
Joined
Nov 17, 2011
Messages
13,651
This thread is temporarily locked until we moderators have come to an agreement about the suitability for this forum.
 
Status
Not open for further replies.
Top