Maker Pro
Maker Pro

Panasonic model CT37G24A stuck on one channel

This set originally came in dead after a storm. I found Q801, Q802,
D823, and the regulator bad. I was very careful to check everything
around the power supply section before powering up. The set came on
fine and looks great, with the on board power button but no other
buttons work. Its stuck on a cable channel with moderate sound level.
The remote does not work anything, (including the power) either. I
suppose if my friend doesn't mind watching NESN for the rest of his
life we could leave it alone but I don't think anyone is such a die
hard.
The sets owner is a good friend who is losing his home to foreclosure
and doesn't have much left. I think I'm going to have to get into the
micro but I have no schematic. Does anyone have one they could please
share? Thanks for any assistance. Lenny
 
Top