Maker Pro
Maker Pro

Panasonic TX-76PW150A geometry

C

Carl M. Pratt

Jan 1, 1970
0
Try this link http://myweb.accessus.net/~090/how2adj.html#2.1b for the
service setup Be careful if you are not adept to this you can screw up your
set.

I just got this model set and changed it over within two days because the
out of the box geometry settings were far from ideal and the replacement is
much the same. I am very disappointed with the range of adjustment available
to the user. Is there a special access combination to be used which can get
a more advanced service setup menu?

Cheers
 
M

Max

Jan 1, 1970
0
I just got this model set and changed it over within two days because the out of the box geometry settings were far from ideal and the replacement is much the same. I am very disappointed with the range of adjustment available to the user. Is there a special access combination to be used which can get a more advanced service setup menu?

Cheers
 
M

Max

Jan 1, 1970
0
Carl M. Pratt said:
Try this link http://myweb.accessus.net/~090/how2adj.html#2.1b for the
service setup Be careful if you are not adept to this you can screw up your
set.

Thanks for the link, some useful info to be found but unfortunately the codes must be different on this set (Australia) so no luck getting the service menu. Thanks for the warning, I can assure you that I won't mess it up if I do get in it. I am only looking for more advanced geometry related adjustments to make some minor improvements.

Cheers
 
D

dck

Jan 1, 1970
0
Max, I too have a Panasonic 76PW150A (in Australia) with geometr
problems - slanted/distorted image. I found the methods quote to ente
service mode not work, as you did. Did you ever succeed in getting int
the service mode? Can you please tell me the procedure?

Thanks,

David.
 
Top