I am trying to build a wind turbine to charge batteries and would like a 24v 12amp output. I am using a double turbine set up along with two batteries to charge. The generators are both listed as 12v and 6amps. The two batteries I am looking at are rated 12v 12amps. I will have the two turbines in parallel and the two batteries in series. If my understanding is correct, the turbines in parallel should produce around 12v and 12amps combined. The batteries in series should produce 24v and 12amps. Therefore I should reach my goal of 24v and 12amps.
I have been having trouble finding circuits like this online. I am not worried about the rpms of the generator right now and will have blocking diods to prevent the energy from the batteries going back to power the generators. I need help figuring out wether or not this will work without building the setup first. If I am missing something please tell me.
I have been having trouble finding circuits like this online. I am not worried about the rpms of the generator right now and will have blocking diods to prevent the energy from the batteries going back to power the generators. I need help figuring out wether or not this will work without building the setup first. If I am missing something please tell me.