Maker Pro
Maker Pro

part identification /Leica INM300 microscope/

pav

Nov 30, 2021
9
Joined
Nov 30, 2021
Messages
9
Dear All,

Could you help me to identify this part please? I am attaching its picture.

This is a small PCB, 100 mm x 80 mm. It is plugged into the larger PCB of the microscope power supply. The power supply itself was manufactured by RSG Electronic Components GmBH.

I would like to understand what does this part do, how critical it is and if the microscope can work without it.

Have a great weekend.

pav
 

Attachments

  • board.jpg
    board.jpg
    188.9 KB · Views: 11

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
I would like to understand what does this part do, how critical it is and if the microscope can work without it.


have you searched for a user or service manual
all of us here would have to do that so that we knew what that board did

I notice the board has a bent edge connector pin
 

pav

Nov 30, 2021
9
Joined
Nov 30, 2021
Messages
9
Hi Davenn,


Thank you for your response.

Yes, I searched for the user and service manual. They are not available on internet. Leica technical support just ignores my requests and does not help. I will remind their sales representative about this case next time he approaches me to sell their product.

Yes, the board has a bend edge connector. This puzzles me too.
 
Top