Maker Pro
Maker Pro

Part of my mini DV has been repaired

J

Jeff

Jan 1, 1970
0
Hi,
In september I post questions about repairing my mini-DV which was
water damaged. Now, I have revived the electronics part, including 3"
LCD display. At least it can be used as a video giditizer. I have
tested for several days for different functions. All the inputs and
outputs are fine except 1394 interfaces because I have no interface
card and cable now. The optical part works although not as sharp as
new. In the past two and half months most time was on the two repaire
manuals and components dilivery. After replacing two parts on the DC
circuit of the main board, it works. There is mechanics problem
now(The tape can load, but display C 31 11 or C 32 11). I think the
best way is to look for a whole deck replacement. Does anyone have
Sony DCR-TRV 15 or 17 damaged other than the machanism deck? If it is
not worth repairing and willing to sell, I would be interested in it.
You can send email to [email protected], or respond here.

Especially I thank Jeff Liebermann, who gave me valuable opinions and
encouragements.
 
Top