Maker Pro
Maker Pro

PCB connectors

cpat

Dec 14, 2010
10
Joined
Dec 14, 2010
Messages
10
I have purchased an evaluation board which has a 5 pin .025 square male connectors on .1 headers. I have been searching for a mating part. I have been on Jameco and Digikey web sites and am going insane using the websites to find a mating part. Can anyone suggest an intelligent website where I can purchase these parts?
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,505
Joined
Jan 21, 2010
Messages
25,505
Headers with 0.1 in spacing are probably the most common connector.

However there are many variations. mostly due to providing some means of polarisation.

You really need to provide a photo.

I assume you're looking t something like this:

icsp_ra_con.jpg


Quite often they don't have that bend in them.

Unfortunately, I don't know the name of the female connector that allows you to attach a cable to it :(

But first, let's find out if it's the right style :)
 

cpat

Dec 14, 2010
10
Joined
Dec 14, 2010
Messages
10
Pins

My pins are straight with no locking or polarization.
 

Attachments

  • 100_0304.jpg
    100_0304.jpg
    107.8 KB · Views: 175

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,505
Joined
Jan 21, 2010
Messages
25,505
I'd have the answer for you right now if I knew what they were called :D

I'm sure someone else will make me look very stoopid by giving you the obvious answer :p
 
Top