C
[email protected]
- Jan 1, 1970
- 0
Hi all
I'm trying to get a feel for what pcb design rules to use. I have
found various manufacturers sites which define their minimum track,
gap and drill size but I'm trying to work out in what order I should
be reducing each of these to get my pcb routed.
Any thoughts or links most appreciated.
Colin
I'm trying to get a feel for what pcb design rules to use. I have
found various manufacturers sites which define their minimum track,
gap and drill size but I'm trying to work out in what order I should
be reducing each of these to get my pcb routed.
Any thoughts or links most appreciated.
Colin