Maker Pro
Maker Pro

pE39 - some kind of diode

DrD

Feb 3, 2022
1
Joined
Feb 3, 2022
Messages
1
Hello everyone,

I am trying to identify this component. It seems to be a diode, but no idea what type. The IV curve indicates it to be a simple diode, but I suspect it might be a high volt zener (ca. 24V, I can't get that high in my tester) , or perhaps a TVS.

From the picture it seems to be an ON semiconductor (now onsemi) component. I have been checking everywhere, but no success.

The complete part number appears to be pE39 BKJL.

pE39 BKJL.jpg

Thanks in advance!pE39 BKJL.jpg
 
Last edited:
Top