A
Arfa Daily
- Jan 1, 1970
- 0
Ron or anybody. Looking for a schematic for a Peavey Backstage 50. Anybody
got one they can scan for me ?
Arfa
got one they can scan for me ?
Arfa
Arfa Daily said:Ron or anybody. Looking for a schematic for a Peavey Backstage 50. Anybody got
one they can scan for me ?
Arfa
DaveM said:Peavey makes their schematics available for all of their instruments and
amps. From their website
Arfa Daily said:I thought so too Dave, but I have only been able to find a user manual for
download. It's not desperately important. Just one of my mate who runs the
shop's customers, who wants a jack putting on the back panel to take out
signal just ahead of the master vol. I just wanted to have a quick look at
exactly how it was configured around that bit of the circuit, just to see what
I was dealing with impedance wise etc.
Arfa
and how good are their schematics? are we talking about reprints ,DaveM said:A freebie download would be a great thing, but Peavey sells their schematics for
only $2.50 US... seems a pittance if it can save you an hour or two of circuit
tracing. I've bought several schematics from them.. they are very friendly and
ship immediately.
Their service folks are quite easy to talk to as well... if you don't mind the
phone charges, give them a call and they will prolly be glad to chat for a few
minutes.
Cheers!!!
Sorry Arfa, don`t seem to have that one.Arfa said:Ron or anybody. Looking for a schematic for a Peavey Backstage 50. Anybody
got one they can scan for me ?
Arfa
Ron(UK) said:Sorry Arfa, don`t seem to have that one.
Ron(UK)
I see that you're wanting to get a tap off pre master volume control?Arfa said:OK, thanks all anyway. As I said, not sweating it, more for interest really.
I dare say that my mate is probably actually a dealer, and could get the
service info direct here in the UK, if it turned out to actually be needed.
As he is a biggish shop selling nothing but instruments and amplification,
he is a dealer for most common makes, and we don't usually have trouble
getting service info for anything that we have in for repair. I haven't even
pulled the chassis out of the box yet, but I'm not expecting anything
elaborate. It's only a single speaker half-size cab. Not much more than a
practice amp really ...
Arfa
Ron(UK) said:I see that you're wanting to get a tap off pre master volume control? You
can probably just pull it off the outer tags of the pot via a capacitor -
but you knew that already :^)
Ron(UK)
Jamie said:and how good are their schematics? are we talking about reprints , copies that
you can hardly make out or what?
cause, it would be nice to know where I could do a clear print of a PDF at
an economical cost. I tried a couple of outfits and they take
you for a ride with schematics that are hardly readable and sometimes
incomplete, or they are not the service schematics but only the
single fold that you some times find in user books.