Maker Pro
Maker Pro

Peavey XR886 Amp no output from Mic inputs

lenc

Aug 15, 2017
1
Joined
Aug 15, 2017
Messages
1
I hope this is the right place to post this. I replaced the Dual Quad RCA connector for the Tape Input and output on My Peavey XR886 PA amplifier when I closed the amp back up no sound from mic inputs. If anyone knows of any common probabilities for my problem please reply.
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
. I replaced the Dual Quad RCA connector for the Tape Input and output on My Peavey XR886 PA amplifier when I closed the amp back up no sound from mic inputs. If anyone knows of any common probabilities for my problem please reply.

hi there
welcome to EP :)

well since you have opened it up, the highest probability is that you have dislodged a connector/patch lead between circuit boards or similar
This assumes that it was working OK before you opened it ?

So open it up again and check EVERY connection/cable and see if you can find one that has either partly or fully fallen out
 
Top