Maker Pro
Maker Pro

PECL twisted pair question

micsa

Aug 16, 2010
1
Joined
Aug 16, 2010
Messages
1
I have to communicate with an existing device, which uses some +5V PECL interfaces over a 150 Ohm twisted pair on 125MHz (the cable is < 10m, 30feet).
The device is transformer-coupled and contains a transmit filter + equalizer.

I've thought I could use TB5T1 for interfacing my FPGA with the cable and the device with direct coupling at my side (the transformer remains at the other side as I can't modify the device), for TX and RX too.

I'm not too experienced with analog thing, please share your thoughts about this construction.
 

Similar threads

R
Replies
2
Views
1K
Jim Thompson
J
A
Replies
1
Views
1K
Andrew Holme
A
S
Replies
4
Views
2K
John Larkin
J
S
Replies
1
Views
1K
Terry Given
T
Top