Maker Pro
Maker Pro

PEEL 18V8 Programmable Logic Devices - Programming specs needed

fredcwGO_BR

Feb 2, 2024
2
Joined
Feb 2, 2024
Messages
2
Howdy,


I'm dropping this word in hopes of getting acces to the specs of ICT 18V8 PEEL ,
Although they are reminiscent of a gone era, still have a lot of them here. But do not have a
programmer.

Since until today coudn't get the info on how to program, still looking.

Found a long gone thread here in wich "R. Steve Walz" mentions " I have the specs on programming 18V8 Peel devices," (https://maker.pro/forums/threads/tutorial-on-programmable-logic-devices.7391/) .. But I'm a newbe here , ...
If anyone can help ,,,


Thanks in advance.
 

danadak

Feb 19, 2021
771
Joined
Feb 19, 2021
Messages
771
A very useful site :


There is a handbook there. And software for programming. You may have to
install/run simulator under older OS virtual machine, like Oracle Virtualbox
or Wine on MAC.....


Regards, Dana.
 
Last edited:

fredcwGO_BR

Feb 2, 2024
2
Joined
Feb 2, 2024
Messages
2
A very useful site :


There is a handbook there. And software for programming. You may have to
install/run simulator under older OS virtual machine, like Oracle Virtualbox
or Wine on MAC.....


Regards, Dana.
Thanks very much, didn't know about this.
Go to look into ...


Best Regards,

Frederico Wilhelms
 
Top