Maker Pro
Maker Pro

permanent magnet

L

luca

Jan 1, 1970
0
Hi all,

I am looking to arrange different permanent magnets with the purpose of
increasingthe the mangetic flux and if possible localize it in specific
area.
I would like to know if you know any books or website where you can
find different arrangement to optimize the permanent magnet array or if
you can give me any suggestion on the topics.
thank you very much

luca
 
A

Adrian Jansen

Jan 1, 1970
0
luca said:
Hi all,

I am looking to arrange different permanent magnets with the purpose of
increasingthe the mangetic flux and if possible localize it in specific
area.
I would like to know if you know any books or website where you can
find different arrangement to optimize the permanent magnet array or if
you can give me any suggestion on the topics.
thank you very much

luca
Google for "Magnetic field modelling" There is good software around to
compute and display fields from a given arrangement of magnets. Then
use your imagination to create the right configuration, once you can see
what the models tell you.

--
Regards,

Adrian Jansen adrianjansen at internode dot on dot net
Design Engineer J & K Micro Systems
Microcomputer solutions for industrial control
Note reply address is invalid, convert address above to machine form.
 
J

J.A. Legris

Jan 1, 1970
0
luca said:
Hi all,

I am looking to arrange different permanent magnets with the purpose of
increasingthe the mangetic flux and if possible localize it in specific
area.
I would like to know if you know any books or website where you can
find different arrangement to optimize the permanent magnet array or if
you can give me any suggestion on the topics.
thank you very much

luca

This will get you started:

http://www.magnetweb.com/design.htm
 
R

Robert Baer

Jan 1, 1970
0
Adrian said:
Google for "Magnetic field modelling" There is good software around to
compute and display fields from a given arrangement of magnets. Then
use your imagination to create the right configuration, once you can see
what the models tell you.
Yes; good modelling software....if you are rich.
 
R

Robert Baer

Jan 1, 1970
0
Terry said:
look harder. FEMM is free.

Cheers
Terry
Sorry; i ASSuME-ed it was hex$pensive like all of the others i looked at.
 
Top