Maker Pro
Maker Pro

phone jack help needed

Q

qdot

Jan 1, 1970
0
Hi,
I have moved into a house that I believe used to be a sales office or
something that has mutiple phone line capability (according to the
phone company guy). The problem is that there is only one jack is
working right now and it's in the master closet. It's a pain in the
ass...

The phone guy says he can find out how to make other jacks active to
share my phone number (I don't intend to use mutiple lines for now) but
will charge ~$100/hr to do that. It sounds like a simple thing to do
according to him but I don't know how.

Can anyone help me figure this out? I may not have given all the
information to answer this question but I don't know where to begin but
to ask in the news group for expert opinion to begin...

Thanks,
Jae
 
B

bloggybob

Jan 1, 1970
0
Let him do it , reason i say this is because i work with phone lines all the
time since im in commercial security and it shouldnt take him more than a
half hour or so to change the wires at the network interface ... unless you
have some knowledge in what to look for and how to find the connections to
change i suggest you just pay the guy .. just may cost you more if you mess
things up within the wiring .
 
M

Mike Berger

Jan 1, 1970
0
A lot of things sound simple until you try to do them. You may also
need special tools that you don't have.

You can buy a tone generator, tone tracer, and appropriate punchdown
tools or whatever else you need and do it yourself, but if it's a one
time thing, I'd have the phone guy do it.
 
A

Asimov

Jan 1, 1970
0
"qdot" bravely wrote to "All" (02 Oct 05 23:35:18)
--- on the heady topic of "phone jack help needed"

Jae,

Use a multimeter to identify the wires...

A*s*i*m*o*v


qd> From: "qdot" <[email protected]>
qd> Xref: core-easynews sci.electronics.repair:343964

qd> Hi,
qd> I have moved into a house that I believe used to be a sales office or
qd> something that has mutiple phone line capability (according to the
qd> phone company guy). The problem is that there is only one jack is
qd> working right now and it's in the master closet. It's a pain in the
qd> ass...

qd> The phone guy says he can find out how to make other jacks active to
qd> share my phone number (I don't intend to use mutiple lines for now)
qd> but will charge ~$100/hr to do that. It sounds like a simple thing to
qd> do according to him but I don't know how.

qd> Can anyone help me figure this out? I may not have given all the
qd> information to answer this question but I don't know where to begin
qd> but to ask in the news group for expert opinion to begin...

qd> Thanks,
qd> Jae

.... Just a little force field zap.
 
Q

qdot

Jan 1, 1970
0
i was thinking that it shouldn't be that difficult, but it sounds like
some special tools/skills are needed. is there any basic website or
reading material that shows how this is done? like phone jack for dummy
or something... how difficult it could be?

Jae
 
Top