Maker Pro
Maker Pro

PICkit 3 for Programming PIC16F627A

BobK

Jan 5, 2010
7,682
Joined
Jan 5, 2010
Messages
7,682
You only need the pickit. Your board has to implement the connections to the 6-pin programming header.

Bob
 

Minder

Apr 24, 2015
3,318
Joined
Apr 24, 2015
Messages
3,318
Or pickit 2, which has a nice add on signal analyzer UART tester etc.
Pickit V2.61.
The Lab11 is not necessarily needed, there is also boards you can make simply on the Nigel Goodwin Tutorial site for this IC 628a.
M.
 

Bluejets

Oct 5, 2014
5,989
Joined
Oct 5, 2014
Messages
5,989
Minder, had trouble previously finding V2.61 for PicKit2, did you have a link at all?
 

BobK

Jan 5, 2010
7,682
Joined
Jan 5, 2010
Messages
7,682
The pickit 2 only supports older obsolete parts. Use a pickit 3. Or, if budget is not a problem, ICD 3 is far better, but costly.

Bob
 

BobK

Jan 5, 2010
7,682
Joined
Jan 5, 2010
Messages
7,682
Pics can be programmed in circuit. All of the boards I have made have the six pin header that enables this.

You can also program then on a solderless breadboard if that is what you are using.

Bob
 

Electrical_Shocker

Oct 24, 2017
20
Joined
Oct 24, 2017
Messages
20
Pics can be programmed in circuit. All of the boards I have made have the six pin header that enables this.

You can also program then on a solderless breadboard if that is what you are using.

Bob

Got it .. Thank You for response
 
Top