Maker Pro
Maker Pro

Picnicking under the Sewage Outflow: alt.binaries.schematics.electronic

R

Roy L. Fuchs

Jan 1, 1970
0
I've been called that before, by dumb ass frat jocks at school.
You must have been 1 of the 10 spammers that sent me hate email,
"STOP your mother F$*king posting" "Get the F$*k out of the
newsgroup"., and of course with no valid return email.


Sorry, IDIOT, but ANY email you receive has a bona fide valid
source.

Are you so stupid as to think that a Usenet post is email?

Also pretty stupid. Oh and where did you ever make a post here with
a valid email address? You're an idiot... face it.
 
R

Roy L. Fuchs

Jan 1, 1970
0
It was said before, add me to a kill file, I did to 10 of you asses
who attacked. You accuse of me of cross posting?


So that the entire electronics community can see just how retarded
you really are.

BTW, idiot.. look the word up.

http://m-w.com/dictionary/community

Take particular note to the portion about "unified".

That's what we are. YOU are the outsider, dig?
 
R

Roy L. Fuchs

Jan 1, 1970
0
What this all boils down to is history of what has been going on in
a.b.s.e for a long time now.


Which is none of your goddamned business, idiot.
 
R

Roy L. Fuchs

Jan 1, 1970
0
Without your permission, or aproval, no one is allowed to
post any files. No Files without YOUR explicit permission.


You did not post a single schematic. THIS IS a schematic newsgroup.
So, it comes down to the FACT that you do not even know what group to
post your CRAP into.
 
R

Roy L. Fuchs

Jan 1, 1970
0
All of your close nit discussions should have been sent to IIRC,
that's what IIRC was made for. But no. You will not allow anyone to
post any files, "under my dead body." That is screwed up.
You couldn't possibly be any older than 13.

IIRC IS: If I Recall Correctly.

IRC IS: Internet Relay Chat.

newtype IS: retarded!
 
R

Roy L. Fuchs

Jan 1, 1970
0
Still whining and whinging Roy? Get a life and some manners

Still a top posting Usenet know nothing, jackass?

Get some active brain tissue.

Learn to conform or be excluded, idiot.
 
R

Roy L. Fuchs

Jan 1, 1970
0
You again? Still using Netscape 4.5 trying to read newsgroups?
Or still stuck on configuering Netscape ?

You quoted Wikipedia? What a lame maggot infested biled filled
donkey.


Dude, you are the epitome of Usenet stupidity.

I know that word is too big for you though.
 
R

Roy L. Fuchs

Jan 1, 1970
0
Not every news-reader has a killfile. I loathe those who suggest
resorting to that tactic. Why not simply clean your act up ?

Graham


There is no way to discuss anything with the idiot. He can't be more
than 13.

I say that the next time he posts a multi-magebyte file here that is
not a schematic, we should shitcan his ass, as in turn him over to his
ISP, and /or news service provider.

If the asswipe reads this, he should take it as the one and only
warning as well.
 
R

Roy L. Fuchs

Jan 1, 1970
0
FWIW I've been using 'personal computers' since around 1983 ! I don't
need any help configuring - but thanks for asking !


He was in diapers, or not yet conceived, I am certain.

He may still be in diapers. Kind of a savant... of stupidity!
 
R

Roy L. Fuchs

Jan 1, 1970
0
Sorry if you got sh*t on!


Better to be pi$$ed off than pi$$ed on.

[Unless it's a hot babe. - Richard the urolagniac]

I was sitting at the company coffee break table, and the girls from
production were picking on one of the secretaries, and they hurt
her feelings to where she ran away from the table crying. Somebody asked,
"What happened?" and somebody answered, "Oh, she was being picked on, and
it hurt her feelings."

The guy I was sitting next to said, "It's better to be picked on than
picked off." ;-)


Is that a post office joke?
 
N

newtype

Jan 1, 1970
0
newtype wrote:
Not every news-reader has a killfile. I loathe those who suggest
resorting to that tactic. Why not simply clean your act up ?
Graham

I have tried 6 FREE newsreaders. They ALL have a Kill file option.
You have admitted it, You are using Netscape 4.5? Wholly cow!
That version was introduced when win 95 was around. Before Win98.
There were more than 5 posts from other users stating, try these
other newsgroup newsreaders! Get modern with the times, Netscape is
too old. But you still attack me, spam me!

The threaten me by contacting my ISP provider that I am posting
copyrighted material , when I kept on saying they are 'dataSHEETS' !
You posted from nethosting , the rules of copyrighted materials.
You don't know a thing about what obsolete means, but you till
threaten me.

Anyone in the 'WORLD', the whole damn World that has an intenet
connection, can see that the 'BINARY' posts were datsheets. You just
have to look at the subject header, it's as simple as that. What in
the hell do you think ML4410 in the subject header means! Clown!
Your don't know? You attack me, you flame me, you pester me ! "Who
told you to post those files? "

I don't have to tell you jack zip NOTHING! YOU don't have any right
in demanding anything from me. Your read and you weep, Puke!

Double standard you are. You said "I've been kind of a netcop,
persist in flooding with your files and I will report you to your
ISP." You keep threatening me.

Who posted that 13.8Megabyte Wavetek 172 Manual? You don't attack
that user? Wavetek is still in business, and zWavetek can enfore
copyright infringement against that person for breaking the law.
You do not threaten that user, but you attack me.

Who are you gonna call at Signetics for an Obsolete TLL PROM ?
No one. No One, because Signetics does not exist. You don't even know
what obsolete means. Which tells me you don't know a thing about
electronics. You also responded "Who cares about those old chips?
STOP posting them" . That is how screwed up are, carrying on your
double standards. YOU ARE WRONG! You have no problems in some
engineer Larkin posting many pdfs? of a $2,000,000.00 building in
San Francisco. But you have a problem in what I post, and when
combined back into a pdf, was smaller in datasize that Larkins posted
pdfs? How the hell can you call your self correct?

Are you now saying that it's OK for a professional engineer who makes
a lot of money, to post pdf files. But it is against "YOUR" usenet
group laws that I can not? I'm not a multi-millionaire, and by your
make believe rules I can not post, I have NO RIGHS to post to an open
forum uesnet newsgroup, because you say so. I Need No Permission
from you or anyother spammer/flammer that has attacked me in an open
forum read around the world. Open forum newsgroup is open to anyone.

You are no net god from alt.config, No netcop, No Administrator, No
NOTHING! You are a self proclaimed vigilanty persecutor of a open
usenet newsgroup to the "WORLD" . You have posted many many times Off
Topic messages, which what do they have to do with binaries anyway!?
But here you even say ..." Good bye " You have attacked other users
before.

In that email you said "Good Bye" , to me. You admitted it right
there buddy boy, you have forced me away from a "Open Forum Usenet
Newsgroup that is carreid acrossed the World", And you are happy?
Sure you are. That alone tells everyone your guilty of harassment.

And with these facts in hand, that is why NO ONE from any other
newsgroup will ever post there design PCB CAD files, no schematics,
nothing, because everyone is afraid of being attacked by you and
others like you, the same users that have attacked me over and over
again.
 
N

newtype

Jan 1, 1970
0
You don't say !
Byeeee,
Graham

I call forth this post as evidence one. You have admitted it that
you are telling me to go bye bye, go away. You do not have the
right to tell me, nor anyone else in the world, to go away from a
open forum newsgroup, open to the worldly public. You have no right
to claim an internet/usenet open forum as your own personal
newsgroup. You Do Not Own anything on the "internet".
 
N

newtype

Jan 1, 1970
0
4.8 actually. It has a nice 'lean' no-nonsense interface. It's
an active *choice*. I've tried others and this is the one I find
best suited for my purposes.


Oh ! Puh..leeeze ! as they say.

FWIW I've been using 'personal computers' since around 1983 ! I
don't need any help configuring - but thanks for asking !
I know about rars thank you. They aren't needed for data sheets
or schematics. If you're posting pr0n videos I can see why you'd
know about them though.


Wrong. You said it right there, YOU associated the multi-part rar
files with porn. This is evidence 2.

You have admitted it before," what are you posting? Your definition
of why files have to be split up is wrong. I have said it before, I
split up ten 1meg files of rars and when unarchived makes a pdf,
which is totally valid as per existing newsgroup laws.

You do not know what rar and par files are, because you have
complained over and over again, you don't know what to do with
these files.

You have complained about some function obsolete function of
Netscape and I think the last time I saw a patch was back in 2001 ?
in newsgroup news.softreaders ...? That is why you don't know.
You will always make up a new story to cover your butt.

You have who told me to post those files, over and over.
To shut you up, I had to read load read articles and ffound
one user "... Can you repost rar 11 and 14" and I also reposted to
you another request from another user in the UK.

That is how much you know. You are so busy in kicking me out of a
newsgroup, your own private idaho newsgroup, you did not even care
about what other users has posted to a.b.s.e

You are guilty of harassment.
 
R

Roy L. Fuchs

Jan 1, 1970
0
I call forth this post as evidence one. You have admitted it that
you are telling me to go bye bye, go away. You do not have the
right to tell me, nor anyone else in the world, to go away from a
open forum newsgroup, open to the worldly public.

Well, you can damned sure BET that if you keep posting NON schematic
binaries here, your ass will get in a sling with your ISP.
You have no right
to claim an internet/usenet open forum as your own personal
newsgroup.

You have no right to invade one either.
You Do Not Own anything on the "internet".

And if YOU want to be accepted on it, you need to learn the meaning
of the word COMMUNITY.

http://m-w.com/dictionary/community


Pay particular attention to the part about:

"a group linked by a common policy"

That is verbatim. Since you couldn't spell vigilante right, I doubt
you'll get that one either.

You could get over this whole thing by Dropping your fucked in the
head position. You have no case.
 
J

John Fields

Jan 1, 1970
0
It was said before, add me to a kill file, I did to 10 of you asses
who attacked. You accuse of me of cross posting?
I stayed within a.b.s.e. whereas John Fields has got 10!? newsgroups
in his list header. Who in the hell is cross posting, not me pal,
John Fields.

---
So what?

Nobody but you is bitching about me cross-posting, but everybody's
getting in your face for flooding the group with stuff that nobody
wanted or wants. That includes your current set of badly thought
out and poorly constructed posts.

So stop trying to take the heat off yourself by changing the subject
and derailing the thread, because it won't work.

The plain and simple fact is that you fucked up by flooding the
group with your crap, and when you were told about it you threw a
tantrum because you're a spoiled brat.

What you should do is apologize to everyone for being such an
asshole, then slink away with your tail between your legs, go
somewhere and lick your wounds, grow up, and come back when you have
something useful to contribute.
 
W

Winfield Hill

Jan 1, 1970
0
newtype wrote...
... You have no problems in some engineer Larkin posting
many pdfs? of a $2,000,000.00 building in San Francisco.

$2,000,000.00? Are you sure it was $2,000,000.00, spot-on
to nine digits? Ahem. More it likely was $2,037,402.18
give or take a few million.
 
D

Dave

Jan 1, 1970
0
From Ho ho ho, Merry .... 26/12/05

QUOTE:

---
I think we should _all_ start the new year being polite, and
respectful, to each other.

--
John Fields
Professional Circuit Designer


UNQUOTE:
 
Top