Maker Pro
Maker Pro

pinouts for summasketch III digitizer

N

none

Jan 1, 1970
0
I recent picked up 4 summasketch III digitizers without interface or
power cables. I pretty sure I can get a power supply. What I need is
the pinout of the RJ-45 connector on the back of the digitizer and how
the power supply and serial/data/interface cable connects to that. Any
help the can be provided is greatly appreciated.

Thank you
 
W

William Lenz

Jan 1, 1970
0
My contact for my summasketch III is:

Sonel Popel 800-344-4723, ext.208
[email protected]

price the items (contact above) they may be cheep enough to not go though
the trouble of making something. If it is to much buy just one then copy
that.
The contact info is about a month old so it should be still good.
You can also go to the CalComp web site they may have some info there.

bill
 
N

none

Jan 1, 1970
0
Thanks for the info. Right now unfortunately I am unemployed and
trying to get this running for some work I'm tryig to get out. I'll
keep searching. I have enough parts lying around that I coule build a
couple so may I could sell a couple of the others. If you find out
anything else please let me know.

Derick
 
Top