Maker Pro
Maker Pro

Please Help?? Easy One ??

I need a copy of the prom inside a vista 20p. I took my alarm system out
a while ago and wanted to install it and the Pitway chip is missing. I
have blanks but not the file. Any help would be greatly apreciated.
 
M

Mark Leuck

Jan 1, 1970
0
I could be wrong but I don't think thats a standard prom
 
A

A.J.

Jan 1, 1970
0
I have a brand new Vista20P board with me.

What kind of equipment do I need inorder to extract the bin from the
microcontroller ?
 
A

A.J.

Jan 1, 1970
0
Thanks man, so what chip should I set my programmer to ? Don't really want
to fry a perfectly good cheap you know. I will have to check my device
support list and see if the chip is supported by my programmer.
 
The device manufacturer is ATMEL
the device is ts87c51rd2-mcb (in board)
you can probably just tell the programmer the chip is a 87c51
just do a read device (into buffer) and then save the file as a bin or
hex (possibly intel hex)
Thanks alot for all of your help.
 
A

A.J.

Jan 1, 1970
0
I just checked my device support list and it is there, but it is indicating
an adapter is required which I do not have.

Sorry bud.
 
B

Bob La Londe

Jan 1, 1970
0
Contact Jim Rojas. He reads chips all the time.


--
Bob La Londe
Yuma, Az
http://www.YumaBassMan.com
Promote Your Fishing, Boating, or Guide Site for Free
Simply add it to our index page.
No reciprocal link required. (Requested, but not required)
 
Top