Maker Pro
Maker Pro

Please help me identify this component

Phaedrus

Aug 19, 2014
3
Joined
Aug 19, 2014
Messages
3
Hello,

(This is my first post so be gentle with me)
I'm trying to repair a treadmill ( incline motor once started wound all the way out) on inspection and one of the components one of components of the circuit board was broken(snapped). I originally thought this was an array resistor.

I have measured the resistance between the pins as follows
Pin 1 to pin 2 is 40kΩ
Pin 1 to pin 3 is 50kΩ
Pin 1 to pin 4 is 60kΩ
1-5 is 70kΩ
1-6 is 80kΩ
1-7 is 90kΩ
1-8 is 100kΩ
2-3 is 50kΩ
2-4 is 60kΩ
Etc.
9 and 10 are broken off.

Markings on it are
T103/103G
Please let me know what this is (a ladder network?) and how I could find/specify a replacement. To fix this circuit board

Thank-you very much
 

Attachments

  • image.jpg
    image.jpg
    127.6 KB · Views: 115

Phaedrus

Aug 19, 2014
3
Joined
Aug 19, 2014
Messages
3
Thank-you for such a quick response. this is a close-up photo on the board. Looking at the datasheet for the link you posted it looks like it's a 121 10k? Is this right? Or could I put in a R2R backwards?
 

Attachments

  • image.jpg
    image.jpg
    225.6 KB · Views: 136
Last edited:
Top