Maker Pro
Maker Pro

Please help me identify this resistor "R200". Pic included

micronut

Oct 3, 2010
2
Joined
Oct 3, 2010
Messages
2
I am trying to repair a Samsung DLP big screen tv. I have repaired the power supply, and now the tv will turn on and operate normally, except that the picture is very green. After closer examination of the led drive board, I have found two thin, surface mount resistors that were broken in half and appear to be burned along the break.
Possibly due to the original power supply issue?

Anyhow, I have moderate electronics repair experience, but not much experience with modern electronics. Any help identifying the values of these would be greatly appreciated!:)

The only marking is "R200" printed on the face of both.

Thanks in advance for any help!
IMAG0110.jpg
 

micronut

Oct 3, 2010
2
Joined
Oct 3, 2010
Messages
2
Thanks for the reply.:)

I Googled "R200 resistor" and that's what came up, but I just wanted some verification.
Thanks again!
 
Top