Maker Pro
Maker Pro

Please help me recognize clamp-meter's cap ratings for replacement

Elecbegginner

Mar 24, 2013
103
Joined
Mar 24, 2013
Messages
103
Hi everyone in this forum .

So 2 days ago i was trying to repair a microwave , i decided to check a big AC capacitor with a clamp meter , i used AC voltage mode , and the meter just shut down as soon as i connected the probes to the AC capacitor .
I opened the clamp meter and found that 2 tracks were out of place and a small capacitor was burned but only 4 symbols were visible in it : YP and 02 , i wonder what rating would be safer to use , this capacitor is attached to a small daughter board making connection between the probes holes and the meters motherboard .
this is how the capacitors looks like :
Microwave's cap :
China_450v_17uf_AC_Capacitor_CBB6520119231416233.jpg

Meter's cap
zEkd9Ra.jpg




Multimetrix CM600
2870d4e57208c022e36c9320a0cfa408-1894922-300_300.jpg
 
Top