moonnightingale
- Oct 4, 2011
- 15
- Joined
- Oct 4, 2011
- Messages
- 15
I was trying to listen the sound on speaker after LC circuit. the impedance was also matched but when i connected the speaker in standard configuration, i did not hear any sound at that time pic is attached
When i connected the speaker in series between L and C, it gave sound
How it is possible, one thing i should mentioned that in series, the voltage just before speaker was 3.8 volts and in above stated configuration voltage was 1.6 Volts.
Yes i agree 3.6 Volts drived the speaker but can speaker give sound in this configuration
I have always seen speakers with one leg connected to ground
Thanks
When i connected the speaker in series between L and C, it gave sound
How it is possible, one thing i should mentioned that in series, the voltage just before speaker was 3.8 volts and in above stated configuration voltage was 1.6 Volts.
Yes i agree 3.6 Volts drived the speaker but can speaker give sound in this configuration
I have always seen speakers with one leg connected to ground
Thanks