CRChisholm
- Oct 31, 2016
- 4
- Joined
- Oct 31, 2016
- Messages
- 4
Ok, I had a simple I deal that I managed to oversimplify.
Here's what I tried...
The idea was to have a five wire interface to allow me to read the values of three 10k pots. As it turns out, this does not work because the most it can return is 10k / 3 for any of the pots. Is there a simple way to modify this circuit to allow reading 0 to 10k from the wiper of these three pots?
I hope the image shows up.
[Mod fixed]
Here's what I tried...
The idea was to have a five wire interface to allow me to read the values of three 10k pots. As it turns out, this does not work because the most it can return is 10k / 3 for any of the pots. Is there a simple way to modify this circuit to allow reading 0 to 10k from the wiper of these three pots?
I hope the image shows up.
[Mod fixed]
Last edited by a moderator: