T
techie_alison
- Jan 1, 1970
- 0
Hello,
Just wondering what's available in the UK off the shelf as far as
electronic encapsulation goes?
I've been using this from Maplin's although it's incredibly viscous and
quite wasteful when doing small runs;
http://www.maplin.co.uk/Search.aspx?criteria=AZ90X&doy=search&source=15
Is perhaps quite expensive too.
It's being used to encase these things;
http://www.retro.dial.pipex.com/pest/pest_029/images/image1.jpg
Have done some Googling and most of the companies out there will refer
you to distributers, eg. Maplin's. , or want to sell in vast quantities.
Ideally I'd be looking for something like a 1kg rub of resin, and a
syringe of hardner. Something which could be used as and when, perhaps
with a shelf life of 6 months or so. I used to do die assembly when
temping during the summer a few years back and we had this single
solution syringe resin which had to be stored in a freezer and was
highly toxic.
Any ideas??
Thanks,
Aly
Just wondering what's available in the UK off the shelf as far as
electronic encapsulation goes?
I've been using this from Maplin's although it's incredibly viscous and
quite wasteful when doing small runs;
http://www.maplin.co.uk/Search.aspx?criteria=AZ90X&doy=search&source=15
Is perhaps quite expensive too.
It's being used to encase these things;
http://www.retro.dial.pipex.com/pest/pest_029/images/image1.jpg
Have done some Googling and most of the companies out there will refer
you to distributers, eg. Maplin's. , or want to sell in vast quantities.
Ideally I'd be looking for something like a 1kg rub of resin, and a
syringe of hardner. Something which could be used as and when, perhaps
with a shelf life of 6 months or so. I used to do die assembly when
temping during the summer a few years back and we had this single
solution syringe resin which had to be stored in a freezer and was
highly toxic.
Any ideas??
Thanks,
Aly