Maker Pro
Maker Pro

power injector for an RCA omni directional antenna



Jan 1, 1970
I am looking for a power injector for an RCA omni directional antenna. I
called RCA and they said they dont sell just the power injector.
Does anyone know where I can buy one or how I can make one.



Watson A.Name - Watt Sun, Dark Remover

Jan 1, 1970

Likely just an inductor to couple the DC power, and a
series capacitor to block the DC from the receiver input.

L and C values depend on frequency (which you didn't provide).

And it needs a wall wart, too. Might be a 9V, maybe less. Current
might be a few hundred mA or less.

@@[email protected]@[email protected]@@[email protected]@[email protected]@[email protected]@@[email protected]@[email protected]@[email protected]@,@@[email protected]@[email protected],@@[email protected]@[email protected]@[email protected]@
###Got a Question about ELECTRONICS? Check HERE First:###
My email address is whitelisted. *All* email sent to it
goes directly to the trash unless you add NOSPAM in the
Subject: line with other stuff. alondra101 <at>
Don't be ripped off by the big book dealers. Go to the URL
that will give you a choice and save you money(up to half). You'll be glad you did!
Just when you thought you had all this figured out, the gov't
changed it:
@@[email protected]@[email protected]@[email protected]@[email protected]@[email protected]@[email protected]@@[email protected]@[email protected]@@[email protected]@[email protected]@[email protected]@[email protected]@[email protected]@[email protected]@@