Maker Pro
Maker Pro

power on delay circuit

C

chitta

Jan 1, 1970
0
Hi
my name is chittaranjan.
I need a waveform with power on as follows
1.HIGH for 1 sec
2. LOW for 2 sec
3. HIGH permanently

Please help me obtain this waveform without using any microcontroller
 
C

Chris

Jan 1, 1970
0
Hi
  my name is chittaranjan.
  I need a waveform with power on as follows
1.HIGH for 1 sec
2. LOW for 2 sec
3. HIGH permanently

Please help me obtain this waveform without using any microcontroller

Read in fixed font or M$ Notepad:

|
| VCC
| +
| +|
| ---
| 1uF---
| | |\ ___
| .---o---|H>O--|<--|___|.
| | | |/ 22K |
| | .-. |
| - | |1M |
| ^ | | |
| | '-' |
| | | |
| === === |
| GND GND |
| 3/6 74HC14 |
| VCC VCC |
| + + |
| | | |
| | .-. |
| - | |3M |
| ^ | | |
| | '-' |
| | | |\ ___ | |\
| '---o--|H>O-->|--|___|-o--|H>O-
| +| |/ 220K | |/
| --- .-.
| 1uF--- 2.2 M| |
| | | |
| === '-'
| GND |
| ===
| GND
(created by AACircuit v1.28.6 beta 04/19/05 www.tech-chat.de)

Requires 1/2 of a 74HC14 (or 74C14 if you're using a power supply of
more than 6VDC), 2 1uF caps, 5 resistors and four 1N914 diodes. If
your power supply takes more than 10ms. to charge up and discharge,
you can lose the two protection diodes.

Simple, not elegant or precise. Your timing on this may vary by quite
a bit.

Good luck
Chris
 
Top