Maker Pro
Maker Pro

Power Supply Question (newbie)

martin_nv

Oct 29, 2010
2
Joined
Oct 29, 2010
Messages
2
Hi,
I am trying to configure a power supply to run a computer peripheral. I want one end to plug into the wall, and the other end to plug into the peripheral, which requires 24VDC, 3 watts. The power supply I have is a V-Infinity FSC-S5-24U. My question is the labelling on the screw terminals. On the left side they are labelled "N" and "L", on the right side they are labelled "+V" and "-V". Which side do I wire the wall plug to, and which side goes to the peripheral?

A picture of the power supply is here:
http://yfrog.com/mhpowersupplyj

Thanks in advance,
Martin
 

Resqueline

Jul 31, 2009
2,848
Joined
Jul 31, 2009
Messages
2,848
N = Neutral, L = Live. Those goes to the wall plug.
+V = +24V, -V = -24V, going to the peripheral.
 
Top