Maker Pro
Maker Pro

Presensetized Boards Question

Hi,

Can somebody tell me where can I buy so called presensetized boards
for making PCBs? Presensetized boards are such copper boards with etch-
resisting coating on them and they are able to be exposed on ordinary
light instead of on ultra-violet (UV) light. I know one brand name for
such presensetized materials - Ever Muse, which is sold in the USA. I
live in Bulgaria and I am looking for a source of such boards which I
can order from and which deliver them to Bulgaria.

Thank you!

Roumen
 
T

Tim Wescott

Jan 1, 1970
0
Hi,

Can somebody tell me where can I buy so called presensetized boards
for making PCBs? Presensetized boards are such copper boards with etch-
resisting coating on them and they are able to be exposed on ordinary
light instead of on ultra-violet (UV) light. I know one brand name for
such presensetized materials - Ever Muse, which is sold in the USA. I
live in Bulgaria and I am looking for a source of such boards which I
can order from and which deliver them to Bulgaria.

Thank you!

Roumen
At one point you could buy spray-on etch resist. If you can't get
presensitized boards you may be able to get bare boards and resist.

If that's not good enough -- you could start importing and selling to
other Bulgarians. Think of your situation as an opportunity, not an
inconvenience (I can say this because I'm thousands of miles away, so
I'm safe :).

--

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com

Posting from Google? See http://cfaj.freeshell.org/google/

Do you need to implement control loops in software?
"Applied Control Theory for Embedded Systems" gives you just what it says.
See details at http://www.wescottdesign.com/actfes/actfes.html
 
J

JeffM

Jan 1, 1970
0
[email protected] dir.bg said:
Can somebody tell me where can I buy so called presensetized boards
for making PCBs?[...]I live in Bulgaria[...]

There has been a great deal of chatter in these groups
about the relative economics of DIY (Do-it-yourself) PCBs
vs handing it off to a pro.
http://groups.google.com/group/sci....ls+solder.mask+materials+chemicals+space+time

There is a PCB fabrication house in your backyard
noted for low cost and good quality.
http://www.google.com/search?q=Olimex+Bulgaria
With no Customs inspectors, etc. to slow down delivery,
I would think this would be especially attractive to you.

(Tsvetan used to post hereabouts)
http://groups.google.com/group/sci....k+silkscreen-component-*+PCB-prototypes-for-*
 
[email protected] dir.bg said:
Can somebody tell me where can I buy so called presensetized boards
for making PCBs?[...]I live in Bulgaria[...]

There has been a great deal of chatter in these groups
about the relative economics of DIY (Do-it-yourself) PCBs
vs handing it off to a pro.http://groups.google.com/group/sci.electronics.design/browse_frm/thre...

There is a PCB fabrication house in your backyard
noted for low cost and good quality.http://www.google.com/search?q=Olimex+Bulgaria
With no Customs inspectors, etc. to slow down delivery,
I would think this would be especially attractive to you.

(Tsvetan used to post hereabouts)http://groups.google.com/group/sci.electronics.basics/browse_frm/thre...
 
[email protected] dir.bg said:
Can somebody tell me where can I buy so called presensetized boards
for making PCBs?[...]I live in Bulgaria[...]

There has been a great deal of chatter in these groups
about the relative economics of DIY (Do-it-yourself) PCBs
vs handing it off to a pro.http://groups.google.com/group/sci.electronics.design/browse_frm/thre...

There is a PCB fabrication house in your backyard
noted for low cost and good quality.http://www.google.com/search?q=Olimex+Bulgaria
With no Customs inspectors, etc. to slow down delivery,
I would think this would be especially attractive to you.

(Tsvetan used to post hereabouts)http://groups.google.com/group/sci.electronics.basics/browse_frm/thre...
 
Top