Maker Pro
Maker Pro

Printing on cartoon box with industrial printer

champ1

Jul 17, 2018
55
Joined
Jul 17, 2018
Messages
55
That doesn't answer the question of which computer port will read the sensor.
Computer has USB port and Printer also have USB so I can connect printer into the USB port of computer
 

Alec_t

Jul 7, 2015
3,609
Joined
Jul 7, 2015
Messages
3,609
Yes, we know about the printer port. You still haven't answered the question !!!
 

champ1

Jul 17, 2018
55
Joined
Jul 17, 2018
Messages
55
Computer has USB port and Printer also have USB so I can connect printer into the USB port of computer
Sorry I didn't understand you're question

As I know computer have serial port, parallel port and USB port. I am using the usb port of computer and USB port of computer for communication
 

Alec_t

Jul 7, 2015
3,609
Joined
Jul 7, 2015
Messages
3,609
RS232 serial ports and parallel ports are rare or non-existent on most modern computers.
If you intend connecting the sensor via USB you will need to find one which has a USB output or else you will have to buy/build an interface to go between the sensor and the USB port.
 

champ1

Jul 17, 2018
55
Joined
Jul 17, 2018
Messages
55
RS232 serial ports and parallel ports are rare or non-existent on most modern computers.
If you intend connecting the sensor via USB you will need to find one which has a USB output or else you will have to buy/build an interface to go between the sensor and the USB port.
oh you're asking for sensor

Take a look at this
upload_2018-11-18_10-42-23.png
 

Alec_t

Jul 7, 2015
3,609
Joined
Jul 7, 2015
Messages
3,609
That's fine. Now, of course, you'll have to write software for both the PC and the microcontroller. You may also need some electronics to interface the (unknown) sensor to the microcontroller. Good luck with the project.
 

champ1

Jul 17, 2018
55
Joined
Jul 17, 2018
Messages
55
You may also need some electronics to interface the (unknown) sensor to the microcontroller. Good luck with the project.
What type of interface you'are talking

I think the output of the sensor will directly connect to the microcontroller.
 
Top