Maker Pro
Maker Pro

Project: Complete design of midi, wireless trigger pad and signal processor

Keith Lykins

Nov 9, 2015
1
Joined
Nov 9, 2015
Messages
1
I am looking for a tinkerer able to assist in the completion of design and assembly of a wireless trigger unit with a processor able to deal with several independent signals. I have a provisional patent with schematics and descriptions. The job will require some design (possible chip design). All of the technology is pretty cut and dry. It exists, just not in this particular format. Can discuss compensation and terms upon reply. Can anyone point me to someone who would be willing to work on this project Please respond via forum

Thank you.
 
Last edited by a moderator:
Top