Maker Pro
Maker Pro

Project Help

Cop1015

Jan 25, 2013
1
Joined
Jan 25, 2013
Messages
1
Ok guys I need some help. I am knowlegable in the construction of project but a noob in the electronics. Simply stated I need a wireless transmitter and reciever. I need a motor/servo to activate for approximately 1/4 turn on command and then reverse 1/4 turn on command. As far as load it will be rotating a shaft approximately 1/4" thick and 4foot long. It will have a low resistance load on the shaft, a little more than the weight of shaft. I need the size of all equipment to be kept small, 1-3inches.

My question is what would be my best option for :
Reciever/transmitter
Motor/servo
Battery

Thanks
 
Top