Jack Padilla
- May 27, 2014
- 8
- Joined
- May 27, 2014
- Messages
- 8
I received this projector as a gift: A MerchSource 1614974 (Known as the 'Wonderwall' Projector).
(Even though it's not professional, at least this novelty works for it's purpose)
It was a bit used, but worked as normal for the first 2 days.
Until the projector turned off on it's own (Possibly the socket where I plugged the projector in was shortened, as the socket does not work anymore) and now, every time I turn it back on (Even on any socket), the brightness is messed up no matter if it is near or far from the wall!
Possibly the issue is caused by either the bulb or the knick-knacks inside it.
Here are a few photos (Taken recently and sorry for large photos):
Here's the projector right now. I hooked it to my DVD player as an example of an output.
Here is the projection at the recommended brightness. It looks bright even though it shouldn't.
Here is the projection at the LOWEST brightness. Still bright but it only projects the colors.
Here is the projection at the HIGHEST brightness. Way too bright (So bright I can't read the text normally).
Anybody help me out on how to fix this thing or give me some recommendations?
(Even though it's not professional, at least this novelty works for it's purpose)
It was a bit used, but worked as normal for the first 2 days.
Until the projector turned off on it's own (Possibly the socket where I plugged the projector in was shortened, as the socket does not work anymore) and now, every time I turn it back on (Even on any socket), the brightness is messed up no matter if it is near or far from the wall!
Possibly the issue is caused by either the bulb or the knick-knacks inside it.
Here are a few photos (Taken recently and sorry for large photos):
Here's the projector right now. I hooked it to my DVD player as an example of an output.
Here is the projection at the recommended brightness. It looks bright even though it shouldn't.
Here is the projection at the LOWEST brightness. Still bright but it only projects the colors.
Here is the projection at the HIGHEST brightness. Way too bright (So bright I can't read the text normally).
Anybody help me out on how to fix this thing or give me some recommendations?