Maker Pro
Maker Pro

Projector Power Supply

D1Hickman

Apr 7, 2022
4
Joined
Apr 7, 2022
Messages
4
I’m trying to find a replacement power supply for a Chinese made projector my kids use. Model YW-60W. Input: AC90-260V; Output: 19V/2.5A 12V/1.0A
 

Martaine2005

May 12, 2015
4,932
Joined
May 12, 2015
Messages
4,932
My search found nothing on that model.
Can you post a photo of the projector and a close up of the power connector.
Many laptops power supplies are 19.5V and up to 5A. Typically 2.5A-3A.
So one can modify a suitable PSU very cheaply. (If you’re so inclined).

Martin
 

CircutScoper

Mar 29, 2022
300
Joined
Mar 29, 2022
Messages
300

D1Hickman

Apr 7, 2022
4
Joined
Apr 7, 2022
Messages
4
It’s an internal power supply. I’m not sure why I cannot post a picture on this thread.
 

CircutScoper

Mar 29, 2022
300
Joined
Mar 29, 2022
Messages
300
It’s an internal power supply. I’m not sure why I cannot post a picture on this thread.
So far as I (a newbie member) has so far discovered, you'll need to upload the picture to a hosting site (e.g. photobucket) and then post a link to it in your thread.

Meanwhile, are you saying the OEM internal supply has died and you want, instead of repairing it, to replace it?
 

Martaine2005

May 12, 2015
4,932
Joined
May 12, 2015
Messages
4,932
It’s an internal power supply. I’m not sure why I cannot post a picture on this thread.
Try resizing the photos to 300kB.
If you can’t find a replacement, you’ll have to use external supplies that are readily available.

Martin
 

D1Hickman

Apr 7, 2022
4
Joined
Apr 7, 2022
Messages
4
My search found nothing on that model.
Can you post a photo of the projector and a close up of the power connector.
Many laptops power supplies are 19.5V and up to 5A. Typically 2.5A-3A.
So one can modify a suitable PSU very cheaply. (If you’re so inclined).

Martin
So far as I (a newbie member) has so far discovered, you'll need to upload the picture to a hosting site (e.g. photobucket) and then post a link to it in your thread.

Meanwhile, are you saying the OEM internal supply has died and you want, instead of repairing it, to replace it?
 

D1Hickman

Apr 7, 2022
4
Joined
Apr 7, 2022
Messages
4
Yes. I would not know how to repair a PCB or what to call the part that is clearly burned.
 

CircutScoper

Mar 29, 2022
300
Joined
Mar 29, 2022
Messages
300
Yes. I would not know how to repair a PCB or what to call the part that is clearly burned.

Well then, without at least some photos to illustrate the problem, you'll be wanting to check in with the ESP/Clairvoyance forum next door. Sadly, I seen to have misplaced my OUIJA board.
 
Top