Maker Pro
Maker Pro

Proteus Run simulation error

Letank2001

Mar 28, 2023
1
Joined
Mar 28, 2023
Messages
1
hi, i have a problem with this circuit

i want to start simulation on it, but there are errors

I want to simulate the circuit from the pdf picture.

in proteus it is only the first part of the circuit made and now I want to simulate it so to know if the values are good to start the project , but is still pop out this error

You have a solution for errors?
 

Attachments

  • Screenshot 2023-03-28 114030.png
    Screenshot 2023-03-28 114030.png
    20.6 KB · Views: 2
  • Screenshot 2023-03-28 114047.png
    Screenshot 2023-03-28 114047.png
    40.8 KB · Views: 2
  • Screenshot 2023-03-28 114136.png
    Screenshot 2023-03-28 114136.png
    36.1 KB · Views: 2

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
You have the supply voltages of the INA122 reversed. Pin 7 should be "+", pin 4 should be "-"
Note the polarity of the battery:
long dash = "+"
short dash = "-"
 
Top