The transformer in the photos is the original. The 'part #' on the original and the replacement are the same...almost. The original one had a third wire on the input side next to the brown and the white wires. It was red and terminated and capped. When I installed the replacement transformer, I connected the brown to brown and white to white. The replacement didn't have a red wire.
That's right, I am confirming that I connected the replacement transformer brown to brown and white to white. However, upon checking the voltage output from the transformer, I now get 15.5 vac! The motor still does not turn on.
Thanks for being patient with me.....I wish I knew more about this.....I just like this turntable a lot and can't afford to replace it at $200 plus. I may have misread my test of the original transformer and it may be fine, therefore, the problem is with something else.
Bob