I am working on a multimillion packaging machine, so I can't have this switch replaced, this is all new and I am not allowed to replace or move this safety switch. It works fine but as I mentioned before, when this safety door vibrates, it's enough to send a signal to my equipment I/O. I can see my LED's come on when it vibrates, this "false pulse" goes to two inputs on my equipment. There are certain specs in electronics as we are all aware, where input signals need x number of miliseconds before it activates. Well, one of my inputs receives this "false pulse" and shuts off one part of my equipment. This same "false input" goes to my other input and it does nothing because it's not long enough. So, there has to be a device out there that would either ignore this signal or increase it.
I've tried to google but no success. Btw, I am not a programmer, neither an engineer, so please be patient. Thanks.