Maker Pro
Maker Pro

PWM drive

colum

Jul 25, 2013
175
Joined
Jul 25, 2013
Messages
175
I have a PWM drive powerful enough to drive 12v DC motors.
I want to split this pulse into 2 pulses
I know it can be done with ICs but then I would have to increase the power all over again
Perhaps Transistors ?? Thanks colum
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,645
Joined
Nov 17, 2011
Messages
13,645
I want to split this pulse into 2 pulses
What?
2 pulses for each pulse from teh driver? Or simply connect the driver to 2 motors?
What is the driver (make, model)?
What are the motors (make , model)?

Please supply more detail.
 

colum

Jul 25, 2013
175
Joined
Jul 25, 2013
Messages
175
What?
2 pulses for each pulse from teh driver? Or simply connect the driver to 2 motors?
What is the driver (make, model)?
What are the motors (make , model)?

Please supply more detail.
Some Asian brand driver
and yes I want to split and have 2 phase similar to a 4 phase stepper control
except that that now I'm starting from full powered 12v and not from ICs and a transistor
and I would like to use it as 2 phase to drive another circuit or convert to ACv perhaps.
Life is an experiment. Thanks, colum


ch
I did build a 4 phase stepper control
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,645
Joined
Nov 17, 2011
Messages
13,645
I may be slow, but I still don't understand the "split" here. Can you supply a timing diagram and a schematic of your proposed setup?
 
Top