Maker Pro
Maker Pro

Question about 12 Volt Drip Charger for Another Battery Type

Rob Pearson

Jun 18, 2014
16
Joined
Jun 18, 2014
Messages
16
Greetings,

I have a Black and Decker weedwacker that takes 8 volt batteries. The
battery charger has gone out on it recently. I tried hooking it the batteries to a solar
car battery charger with an adapter kit I bought at Harbor Freight. I also
have a 12 Volt Car Battery Drip Charger. I'm using alligator clips to go to
the correct terminals, but there is also the option of going into leads that
go to the mount which fits over the batteries. The wall wart part I figure where
all the electronics is, but I may be wrong about that.

I was hoping to get some thoughts on this. I know the drip charger would
not be save to leave on for a long time.
 

davenn

Moderator
Sep 5, 2009
14,260
Joined
Sep 5, 2009
Messages
14,260
hi there

well to offer decent help, it would help if we knew what type of batteries are in the drill
different rechargeable types have different charging requirements and plugging any
normal type of plugpack across the battery pack can kill the batteries and possibly
cause an explosion or fire. At the very least, they are likely to seriously overheat

Dave
 
Top