Maker Pro
Maker Pro

Question about computer power supply torroid?

samy555

May 11, 2010
63
Joined
May 11, 2010
Messages
63
Hi
The following image shows a part of a PC power supply, Where clearly shows a torroid.

It is yellow

power%20supply%20buldge.jpg


My question is how can I use that torroid to make a 1.2 mH coil?
please give me the formula of calculation and in what frequecy band it can be used?
thanks
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,505
Joined
Jan 21, 2010
Messages
25,505
We can't give you a formula, because we don't know the specs of the core of that torroid.

If you have something that can measure inductance, then you can keep adding or removing turns until you get to a desired inductance.

The next trick is the frequency. It looks like this is in a switchmode power supply (and it appears to be a transformer), so I guess the toroid core is OK for around 100kHz.

The next trick is determining when it will saturate. If you know the number of turns and the current passing through it then you can also calculate the saturation current for a different number of turns.
 

samy555

May 11, 2010
63
Joined
May 11, 2010
Messages
63
How to calculate the saturation current for a different number of turns?
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,505
Joined
Jan 21, 2010
Messages
25,505
If you know the saturation current is 1A for 10 turns, it will be 0.1A for 100 turns. (turns times amps remains constant).
 
Top