Considering that the efficiency specs are very close this will work. If you
put them back to back you will have a bi-directional effect of the voltage
rating of the active Zener plus the diodes conductive loss. This is usually
about 0.6 to 0.7 Volts.
--
Greetings,
Jerry Greenberg GLG Technologies GLG
=========================================
WebPage
http://www.zoom-one.com
Electronics
http://www.zoom-one.com/electron.htm
=========================================
Is it the case that two 12 volt zeners in series will act like a 24 volt
zener?
Thanks,
Bill