Maker Pro
Maker Pro

question on Ohms and Watts

zevooazaz

Jan 15, 2011
1
Joined
Jan 15, 2011
Messages
1
Hello all,d
I'm glad i found people that can help me out with this because I'm not very familiar with this stuff.

the manual of the power amplifier says that the output is 500w at 8ohms
So if I put 2 speakers of 250w RMS rate 8ohms it sould be OK.

Now the manual says something else, as well.
amplifier output 750w at 4ohms.

That means, if I connect 4 speakers rated at 8ohms the resistance on the amplifier will be 4ohms.
so I'm thinking the following
2 x 250w (8ohm) and 2 x 100w (8ohms)

will this work? does it absorb the 750watts or it will cause problems to the speakers.
please help me on this....

Jim
 
Last edited:
Top