Maker Pro
Maker Pro

Radio Control RF 433

Nowatiny

Sep 30, 2020
10
Joined
Sep 30, 2020
Messages
10
Hello,

From the other receiver:
Receiver module :QA-R-011
Working Voltage: DC 3.6V~24V.
Maximum Load: 2A.
Static Current: 3.6 mA ~ 5.5mA.
Working Frequency: 433MHz.
Reception Sensitivity: ≥ -107dBm.
Modulation Mode:ASK (superheterodyne).
Number Of Stored Remote Controls: ≤ 10.
Working Mode: Momentary, Toggle, Latching Mode.
Learning Style: Learning Button.
Working Temperature: -20 degrees 80 degrees.
Appearance Size: 26mmx 13mm x 1mm (length × width × high).

Bertus

This mean that the Switch is not supported? I have to look for something else? What i should look for?
 

bertus

Moderator
Nov 8, 2019
2,632
Joined
Nov 8, 2019
Messages
2,632
Hello,

The other receiver can directly drive the ledlamp.
If you want to use the existing receiver, you will need a power driver:

nowat_rsz_ledlamp.jpg
The mosfet will easely be able to drive your ledlamp.

Bertus
 
Top