You're going to have to give us a better hint what you're up to.
An ASCII diagram might help.
In series you have 450V 1.33uF; in parallel it's 150V 12uF.
ok, the thing is I don't know which way would best power a rail gun.
I saw a website with a 4.2mF 450V capacitor. I'm thinking I'll just
go with 150V (charge from a wall outlet and diode bridge) and see what
I can do. Any other ideas are appreciated
I have a diode bridge, but it goes from ac 120V to dc 110V. Anyone
know why that is?
I have an 800uF capacitor (200V) I would like to filter the signal
with. Is it ok to connect it in parallel to the ac current, or will
it ruin it to charge it the "wrong" way. If it's ok, I need to make
sure it takes at least 1/120th of a second to charge, right? Anyone
know the formula? That way I will be able to tell what size resistor
I will need. Thanks.